A low foam, final acid anionic rinse for use in the meat, beverage and food industries and now available for homebrewers.
Benefits:
Leaves Tanks and Equipment Spotless.
Not Affected by Organic Materials
Accepted by USDA
SANICLEAN is a blend of phosphoric acid and Sulfonate Oleic Acid. This synergistic blend provides a unique synergistic system that is unaffected by excessive organic soils. SANICLEAN is low foaming. Unlike other acid anionic detergents, SANICLEAN will not produce excessive foam when recirculating through CIP systems. Cleaning with SANICLEAN on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. SANICLEAN is also excellent for part soaking. If kept at a pH of 3 or below SANICLEAN will remaineffective for a week at a time and not require sweetening to eliminate spotting and remove odors. It is not recommended to use SANICLEAN on soft metals because of the acid nature of this product.
Use as a final rinse after thoroughly cleaning with a good alkaline cleaner such as PBW. Use SANICLEAN at a rate of 1 oz per 3 gallon of water. Apply by spray or soak wit a contact time of at least 3 minutes. Empty or drain vessel and let air dry.