An affordable double roller grain mill.  This Mill is a great tool for efficiently grinding malted and non-malted barleys, corn, and grains. Adjustable gap setting for grinding grains and other materials to perfection. It comes with a longer shaft so you won't hit the pail while grinding with the hand crank. The rollers are made of Stainless Steel. The Standard Hopper holds 10 lbs. It has a solid base and can be easily attached to a drill with no extra parts. When using a drill at 500 RPM you can crush up to 6 pounds per minute. easily adjusts to different size buckets.

Operating instructions:  The Roller Mill consists of two long rollers with textured surfaces that aid in pulling grain through. One of the rollers on the grain mill is attached to a hand crank, whereas the second roller moves from the friction created when the grain is present. The rollers rotate in bearings, which are mounted in two precision aluminum-bearing plates.
Before using, you must adjust the spacing between the rollers in order to obtain the best results. This is done by first loosening the thumbscrews. After the thumbscrews are loosened, rotate the knobs on the sides until the desired distance is obtained. There are measurements on the sides of the mill to aid in finding an appropriate distance, but to obtain more accurate results “feeler gauges” can be used. The distance between the rollers should be the same throughout. Once you are satisfied with the positioning of the roller, retighten the thumbscrews. Please note that these should NOT be loosened or tightened with any tools. Finger tight is sufficient.